of EL PASO, TEXAS
=>Customized Devices Application Form (CDAF)
All Customized Device (CD) Types (framed page) - All CD Types (unframed page)
Mind Control, Electronic Attack, Unusual, Strange CD Types (this webpage)
These 2019 Catalog Webpages Now on 1G Flash Drive (only $19.95)
Lone Star Consulting, Inc.: (See Our CDAF Page or Sitemap Page for Address)
VOICE (9-5 MST): [915 - 474 - 0334]
Check, Money Order, Money Transfer Service (MTS), Trade
sitemap - policies
Site - No cookies - No adware - No spyware - No trojans - No viruses -
No worms - No spam - No popups
We Respect Your Privacy - We do NOT Monitor nor Track Your Activities Online, nor Share Your Data
EMF, Microwave, RF Jamming, Masking & Generating Device-Types
We are here to serve TI victims to help save them from their perps. The perps hate us for that! Just as TI perps are usually experts at harassing and persecuting TIs, they use those same intentions against us. To discredit us, entrap us, force us out of business, harass us, and get us into legal trouble. Without us, perps can 'feast on your brains' with impunity. The perps have their agents working social media, TI groups, complaint systems, etc. Do NOT let perps scam you into not obtaining protective devices from us, thereby leading you to their slaughter. Do NOT let perps trap you, set you up or isolate you. Whatever insulting they say about you and us, the opposite is true. If you have any questions or concerns relevant to us or anything on our website, or are aware of suspicious activity against us, please email us right away. We are custom device designers and makers for decades - with many repeat Clients - all of our devices are unique and handmade to our Clients' orders - so those who claim or imply that any (or all) of our devices are this or that, they are lying - DO NOT FALL FOR PERP SCAMS!
Our Mind Control and Electronic
Attack Webpages with Important Technology Information:
ELECTROMAGNETIC, MICROWAVE, RF, ELECTRICAL, IMPLANTS MIND CONTROL ELECTRONIC ATTACKS
SOUND, AUDIO, ULTRASONIC, INFRASONIC MIND CONTROL ELECTRONIC ATTACKS
High-Tech Mind Control Attacks, Electronic Attacks, Countermeasures Customized Device Types
Mind Control (Mindcon, MC), Neurological Weapons, Subliminal Mind Control, Body Control (Bodycon), Behavior Modification, Brain Entrainment, Brainwashing, Brainwave Signatures, Remote Neural Monitoring (RNM), Mind Reading (Mindread), Mind Probing, Remote Influencing, Voice-to-Skull Technology (V2K, V2S), ELF Attacks, Electronic Attacks, Electronic Harassment (EH), Directed Energy Weapons Systems, Electronic Implants (EI) and Brain State Control / Brain State Monitoring, Microwave Attacks, Microwave Harassment, Microwave Mind Control, EMF Attacks (Electromagnetic Attacks), EMF Mind Control (Electromagnetic Mind Control), Circular Polarized Light Attacks, Carrier Current Attacks, Fluorescent Lighting Attacks, Brain Stimulations, Implanted Fake Memories, Implanted Thoughts, Manchurian Candidates, Electronic Gang Stalking, Manifestations, Electronic Countermeasures Products and Services.
Unique, Original, Made-to-Order, Special Needs, Unusual, Strange, Weird Customized Device Types We Can Do For YOU! Backed by 25+ years of Professional Design Experience!
... and tell your friends!
Hello! We support many technologies. For introduction into how to obtain hardware and our design philosophy, please go to our Home Page: Home. Hotlinks to all of our Device Types: Devices. Hotlinks to all of our high-tech Topics, Titles: Site Map. When you are done, please use your Browser's Back Button to return here.
DISCLAIMER: OUR MEDICAL POLICIES REGARDING
ALL OF OUR OFFERS FOUND EVERYWHERE: NOTE: The term, "Medical" and
related terms in all of our webpages include ALL medical fields, ALL dental
fields and ALL veterinarian fields (animals can also be injured by electronic
attacks). We recognize that once a buyer buys any device from a seller, the
seller has no control over what the buyer may actually use the device for nor
does the seller assume any liability to anyone for any use in any unsafe or
improper environment or way, misuse or abuse of the device. We recognize and
fully respect that people have the right to choose whatever form of medical
care they prefer; we are not licensed to practice medicine, and therefore we
cannot and do not provide any medical advice, medical opinion, make medical
claims, nor scientific claims, nor supernatural or paranormal claims, nor tell
you what the causes are for any medical-like manifestation. Nor anything we
may provide you is to be used for a medical prevention, diagnostic, treatment,
cure or medically-assistive reason; nor to in any manner stop, delay, speed
up, interfere with, change or replace any medical procedure or drug prescribed
for you by any trusted licensed medical person or other entity. All medically-related
statements which we may make are lay, anecdotal and personal opinion-type statements
only. If you are suffering from medical-type manifestations, we always recommend
that you first obtain a complete medical exam from trusted and licensed medical
professionals (at your end and your expense) to diagnose,
treat and possibly cure all medically-caused manifestations. ANY
MANIFESTATION - MEDICAL-LIKE OR OTHERWISE - WHICH HAS NO KNOWN MEDICAL OR OTHER
NATURAL CAUSATION, MAY BE CAUSED BY MIND CONTROL OR OTHER TYPES OF ELECTRONIC
NOTE-1: We cannot produce any device which is intended or likely to be used as a weapon, to retaliate against anyone, or which inflicts injury, pain or suffering to any person or animal, or which causes any other kind of mind control- or electronic-induced manifestations, or which is otherwise illegal, unethical or immoral. So please do not contract us for any device to treat, cure, diagnose, prevent or assist a medical condition, or to cause any kind of mind control or body control condition, or is likely to harm any person, animal or property, or is likely to be illegal, unethical or immoral. Do NOT use any device or statement we provide to stop, delay, accelerate, substitute for, modify or change any medical advice or device provided to you by a licensed, competent and trusted medical provider.
NOTE-2: A few of our device-types come with an electrode(s) and/or induction coil(s) to be used on or near the skin (all electrodes are surface electrodes - none are invasive). Not even after decades and 100s of devices, no Client or our personnel (who create, test and also use these devices) has ever reported or complained to our knowledge about any harmful effects to them for any device we provided them, so we consider all of our device-types to be safe. Just to be extra safe, if you obtain a device type of ours which comes with an electrode(s) or induction coil(s) used on or near the skin, please consult with your licensed, competent and trusted medical provider (at your end and your expense) to verify that such a device-type is not likely harmful to you for you to apply on yourself, especially if you have heart rhythm problems or are connected to or have implanted inside of you an electronic medical device (including, but not limited to, pacemakers, diabetic controllers, and nerve stimulators), or you are pregnant, or you have allergies, illnesses or injuries or any other medical condition that might be adversely affected by electrodes, coils, EMFs or ultrasonic signals. As with all types of electronic devices from us or anyone else, do not place EMF coils directly onto the skull.
ADD A NEW ELECTRONIC FREQUENCY COUNTER TO YOUR CUSTOMIZED DEVICES: Many of the Device-Types described herein automatically come with displays. These displays may consist of meter-type digital readouts, analog readouts or LEDs. Now you can add a new small and portable Electronic Frequency Counter (EFC) to any Customized Devices (CD) device you contract for with us (includes, but not limited to the Device-Types described herein) which processes or produces a sinewave, square wave or triangular wave between 0.009 Hz and 99,999 Hz. Be sure to specify an EFC for YOUR device CDAF (green link at top of webpage is CDAF; only $99 extra for the EFC, $49 extra to modify each device to be EFC-capable). With an EFC, you can monitor the entire effective air bandwidth for infrasonic, audio and ultrasonic sounds, as well as electromagnetic signals within this same bandwidth - including brain wave frequencies and many power, servo and control frequencies! This should greatly increase your data and documentation, and is especially useful for tracking and analyzing mind control, electronic attack, radionics, audio, power, servo, control and other signals. Since the EFC comes as a separate module which plugs into your CD devices, all you need is one EFC for all of your EFC-capable devices, PLUS you can use your EFC for other non-CD devices and uses. We can sell you the EFC by itself custom-modified with battery holder and ON/OFF switch, if you wish, and with any of these types of signal connections: RCA, phone plug, miniphone plug, BNC, USB, spade lug, flat lug, ring lug, banana, pin, barrel plug, bare wire ($249 + S/H ($6.90 USA S/H)).
Introduction to this Page
Customized Devices Application Form (CDAF)
The PERSONAL EMF JAMMER (or Personal Signal Jammer): John Williams's extensive researches into EM weaponry and EM harassing devices (and Radionics) - including on-site investigations of cases - have resulted in a high level of understanding and insights into EM weaponry and electronic countermeasures (EM weapons countermeasures), such as EM jammers and EM zappers. The technology for powerful and invisible EM attacks clearly exists - attacks aimed at harassing, controlling, crippling, and "poisoning"! Do you:
And you are certain that these manifestations
are not caused by any medical condition. You may be the victim of an electromagnetic
"Signal Jammer" is also referred to as: Signal zapper, signal blocker, signal scrambler, signal crammer, signal obstructor, signal squasher, signal destroyer, signal deactivator.
PEMFJ-type devices, as with all RF transmitting devices we design and build, is based on our RF policies defined on our policies webpage (policies.htm). The PEMFJ is designed to send out strings of pulses in a narrow bandwidth (selected center freq 1MHz - 3GHz; BW is 0.1% center freq or 10KHz, whichever is greatest) designed to jam (within the immediate area of one's body) offending EM transmitters, surveillance devices, microwave controllers, et al - even the newest EM devices. Portable and worn or carried on or near the body. Note that EM signal jammers are never designed to operate as electronic weapons or to jam legally licensed transmitters. Jammers transmit no intelligence but only a high-frequency carrier signal typically modulated by white noise or pink noise to mask out the offending signals of an electronic weapon (if you could hear the EM white noise, it would sound much like distant rain; EM pink noise sounds similar to white noise but has higher or lower composite pitch, depending on filtering). In contrast, electronic transmitter weapons transmit definite control signals or data signals which are usually designed to cause harmful manifestations in a person(s) (usually a targeted person), animal(s), and/or equipment. Since the bandwidth that harmful EMFs can occupy is enormous, it is important to determine where in this enormous electromagnetic spectrum lies the signals harmful to you. Therefore, you should first strongly consider as a Customized Devices the purchase of a directional signal strength or signal triangulation device so that you can ferret out the offending signals red-handed, detect their frequency(ies) (bandwidth) and include those details in with your PEMFJ-type CDAF - see our popular THE ULTIMO EM TRANSMITTER TRIANGULATOR and THE ULTIMO EM TRANSMITTER DIRECTION FINDER -type devices above for a special deal. Last made $1495 [2 lb] (rough price when the bandwidth of offending signal was provided; if frequency is not provided, we select the frequency based on the best of our abilities resulting in less probability that we selected the right frequency and device may be substantially more expensive; we cannot do a wideband PEMFJ, nor a PEMFJ for certain frequencies (eg: security frequencies, military frequencies, first responder frequencies, airline frequencies, etc.)).
The PROGRAMMABLE NARROWBAND FREQUENCY GENERATOR: The crystal-controlled oscillator PNFG will allow you to select discrete frequencies (10KHz - 200MHz), up to 12 freqs of the frequency set you specify. In your CDAF, just tell us which frequencies you want in your set, and your set of waveforms. Waveforms can be sine, squarewave, pulse, sawtooth and/or triangular. And specify any modulations or frequency mixing you want. And whether you want a high-fidelity (1-channel) or stereo (2-channels) output(s).
And within allowable bandwith ranges, we can also
change your selected frequency (ie: we replace here any crystal you want) (additional
costs may apply).
One great use is to produce positive sounds for your personal enjoyment or meditation (eg: a frequency set consisting of Solfeggio, Chakra and/or other sounds). Another major great use is as a personal signal jammer to jam a particular frequency or selection of frequencies that you believe is annoying or attacking you. "Signal Jammer" is also referred to as: Signal zapper, signal blocker, signal scrambler, signal crammer, signal obstructor, signal squasher, signal destroyer, signal deactivator.
Includes an 8-ohm output and oscilloscope output (does not include speaker nor oscilloscope). For a single frequency, sinewave waveform, no modulations nor mixing, 1-channel, last made $995 [2 lb] (add $99 for each additional frequency, and $199 for each type of modulation and/or mixing type you need) (since the PNFG uses a crystal controlled oscillator (CCO), it is restricted to narrowband. And we can't do some restricted frequencies (eg: security frequencies, military frequencies, first responder frequencies, airline frequencies, etc.)).
The ULTIMO DOUG COIL RIFE MACHINE
(PEMF Device): Our Doug Coil device-type
is a PEMF type of Rife Device we have designed as a countermeasure against mind
control and electronic attacks. The traditional "Doug Coil" was invented
for other reasons in which the inventor and its users clearly believed that
by exposure to highly intense EMFs, Lyme disease, herpes, cancers, and other
diseases could be treated or cured. Our belief is that highly intense EMFs would
likely cause serious tissue damages, and we would never advise highly intense
EMF exposures for any reason from anybody's EMF generator. Nor is our Doug Coil
system intentionally designed to treat or cure diseases.
The traditional Doug Coil system is a physically large, costly to buy and operate, energy guzzling, limited waveforms and tuning versatility and limited outputs system, typically consisting of 4-5 large devices wired together, running off of 120VAC or 240VAC at about 15 amps (a popular variation is the Spooky2, while relatively cheaper for the basic module, you have to also buy a separate frequency generator and transmission system, then engineer the hookup yourself through your computer (the Spooky2 is software-based; and you know how computers can be hacked and controlled by hackers), so we also do not recommend the Spooky2 or any other traditional Doug Coil variation).
Our UDCRM outputs much less intense EMF signals. Our Doug Coil system is very portable, consisting of 2-3 handheld devices (the Doug Coil module and the coil transducer(s)). Our Doug Coil system is very versatile: It produces pulse, square, sine, triangle and sawtooth waveforms as tuned-in selectable single frequencies or as swept frequencies, 100 Hz to 10 KHz (if you wish, we can go lower than 100 Hz and/or higher than 10 KHz). And of course, our Doug Coil system can be powered by DC, AC or both (DC is the default power). If you want to assemble your own traditional high-powered Doug Coil device but with the great extra features of our UDCRM, you could just simply connect the UDCRM's output to a power amplifier's Input, and the coils from a traditional Doug Coil to the amp's Output, which we do not recommend. Supplied with our special Doug Coil coil(s) to jam offending external EMFs, but also can be used with non-invasive skin electrodes to possibly also jam electronic implants.
NOTE: We can also do the Lilly waveform and/or pulse train waveform. BE ADVISED: While Lilly waveforms at some frequencies have much better effects on living biological tissues over long use periods at some frequencies than other waveforms, they can also be very dangerous waveforms at other frequencies, which perps have been clearly weaponizing for decades. Lilly waves have major applications in Psychotronic Warfare, are referred to as, "the madness waveforms", and have been intensively researched for their Psychotronic Warfare values by DOD and other countries for decades (eg: Russia, China, others). That's because Lilly waveforms, at certain frequencies, can resonate with the water, blood sugar and blood iron in the brain, thus entraining them, thus causing unexplained mood changes (happiness, apathy, etc.), unexplained physical movements or lack thereof, dizziness, confusion, vertigo, unconsciousness, etc. They can also cause equipment malfunctions; one example: Touch-control lights coming On or Off without being touched. This is why we don't push Lilly waveforms.
Our Single UDCRM (S-UDCRM), last made, $1595 [4 lb]. Our Double UDCRM (D-UDCRM), wired as a Helmholtz coil configuration (produces a far more uniform EMF than the S-UDCRM), last made $2895 [7 lb]. Specify all customizations you want in your CDAF.
The ULTIMO BODY SIGNAL BLOCKER:
Some scoff at the notion that perp's can put electronic signals onto your body
to identify you, track you and perform functions on your body. Researchers have
already successfully developed smart phone apps in which the the smart phone
transmits thru a conductor on it, touched by a hand, an electronic security
signal that travels thru the body and is then emitted from the other hand touching
a security conductor on the door or other lock, which then 100% identifies the
person trying to unlock, then unlocks the door or other lock so the person can
get in - a signal that the person cannot feel and is unaware of. This recent
technology is proof that perps can target and impinge malicious signals directly
onto your body to identify you, to control what you do, to injure you, to track
you, and to surveil you. Likewise, signals that your body generates can also
be transmitted to perps using this technology. Whenever a perp attacks you using
external electromagnetic signals, the attack hits your skin first, then passes
thru your skin, being absorbed by both your skin and your bodily tissues under
your skin, resulting in attack signals being on your skin and some being inside
your body. Fabrics offer no protection. When you walk on a dry nylon rug barefoot,
and then touch a door handle with your hand or other bare body part, you are
likely to get a painful static electric shock caused by an electric discharge.
That is because the electricity you got onto your feet from your foot skin-nylon
rug contact is transferred to all over your body.
Perps abuse your body to electronically attack you! Likewise, even if a perp may target a small part of your body - even just a fingertip - all of your body and skin bears some of the same signals the perp puts onto that part of your skin he/she irradiated. Natural signals on your skin when a perp's signals first hits your skin should initially protect you by disrupting and defeating the perp's malicious signals trying to enter your body - until the perp's signals usually quickly overwhelms and replaces them because the perp's signals will likely be the strongest signals by far affecting you. In a sense, the perp signals take over your body's natural signals with his/her signals. Sometimes but not always, the TI will actually feel this change (eg: your skin crawls, tingles, itches or feels like it is being poked by pins or needles; your hair stands up on end; you feel like there is electricity in the air; you may sneeze or your eye waters for no known reason, etc.), you feel like you can't sit/stand/sleep still, you suddenly feel very anxious for no apparent reason, you have a "bad hair day" for no apparent reason, and/or you get a vague sense that something is just not right. Note that just as with sounds and chemicals, there is a large variation in people's sensitivities to EMF attacks - while Person A may sense little or no manifestations, Person B may be devastated. The perp may be attacking you whenever he/she wants to just in your normal daily activities of touching things, and you may be totally oblivious to the perp's attacks - only suffering its manifestations and consequences that you cannot explain.
The UBSB gently attaches to your skin with skin-surface electrodes (ie: non-invasive electrodes, our Soft-Pinch Electrodes), generates strong random signals onto your skin that jams the perp's signals of various waveforms to overcome them, thus blocking the perp's signals from accumulating on your skin or penetrating your body and disrupting the purposes of the malicious signals. Since your body is relatively conductive, the UBSB protects your entire body, whether you are naked or heavily clothed. When the UBSB output signals go low, whatever other signals are on your skin at that time will be drained to ground - effectively shorted out. When the UBSB output signals go high, they disrupt the perp's new incoming malicious signals. The UBSB is designed to act both like a full-body skin-level electronic shield plus as an electronic jammer, neither of which can be overcome by the perp changing attack frequencies (or using multiple frequencies), changing attack directions (or using multiple directions), or changing attack timings. Since the UBSB output signals are random and constantly changing, the perp cannot modify or invent a device to defeat them, for example, by synchronizing with them.
Note-1: While the UBSB provides substantial protection from electromagnetic attacks, it does not protect against ultrasonic attacks since ultrasonic signals do not manifest themselves as skin electricity (our other various shielding and jamming device-types do protect against BOTH EMF and ultrasonic attacks).
Note-2: The UBSB is not a TENS system; nor can it be used as a TENS system; nor can any TENS system be used as an UBSB.
The UBSB device also includes 3 Soft-Pinch Electrodes for both maximum electrode comfort and conductivity to the skin. Also includes its power supply and User Manual. Also includes a Waveform Selection switch (which also has an OFF position to shut-off the output signal if you wish). Also includes a NEW MULTIMETER, so that, in conjunction with our Soft-Pinch Electrodes, you can check voltages, currents and resistances between various parts of your body to detect levels of ongoing perp signal exposures, and any anomalies which may be caused by perp attacks or by serious medical conditions (which may be unknown to you - which you may want to bring to the attention of your medical provider). Last made $1995 [2 lb].
The ULTIMO PULSED NEUROPHONE BODY SIGNAL BLOCKER:
See Ultimo Body Signal Blocker (UBSB) above. While the UBSB is designed
to both shield and jam against sinewave / triangular wave and unmodulated pulse
wave signals that land on the body, the UPNBSB is designed to both shield and
jam against complex modulated pulsed EMF Neurophone-type signals in a similar
Microwave Hearing (or Microwave Auditory Effect (MAE) or Frey Effect) can be based on Neurophonic technology. MAE typically not only results in some very unpleasant conscious buzzing, hissing, clicking, knocking, humming (Taos hum?), and/tapping sounds, as well as pins and needles (depending on pulse frequency and pulse modulation scheme used), but can also cause permanent brain damage and even death (depending on intensity of the pulsed signals). Many scientists believe that the strange sounds and feelings are the result of the pulsed microwave signal heating the ear's cochlea. While we believe that this is likely one effect, we also believe that it causes other biologic effects. Recent scandals of MAE attacks, allegedly perpetrated by Cuba (ie: Russia) and China, have been widely reported. While EMF Neurophonic attacks appear NOT to be limited to pulse signals, clearly, pulse signals are the predominant modality. While on the CONSCIOUS level you may be annoyed by all of its buzzing, hissing, clicking, knocking, humming, and/tapping sounds, as well as pins and needles, on the SUBCONSCIOUS level the message is being understood and acted upon by your brain. That's because your brain is one very amazingly versatile tool always trying to make sense of stimulations it receives. Because your brain usually cannot determine the validity of a stimulation, it treats all stimulations as valid. This is often referred to as a V2K (voice-to-skull) or "Voice of God" attack that can really mess up a TI, if and when it occurs, by forcing him/her into thinking certain thoughts, hearing certain sounds, seeing certain things, speaking certain words, having false memories / distorted memories, confusion, vertigo, feelings of illness, feeling all stressed out, unjustified panic attacks, feelings of guilt, feeling certain sensations/emotions/moods, disturbing sleep, multiple personalities, temporary mental malfunctions or physical malfunctions, and/or even taking certain actions (check with your doctor before considering MAE or Neurophone attacks).
Note-1: While the UPNBSB provides substantial protection from electromagnetic attacks, it does not protect against ultrasonic attacks since ultrasonic signals do not manifest themselves as skin electricity (our other various shielding and jamming device-types do protect against BOTH EMF and ultrasonic attacks).
Note-2: The UPNBSB is not a TENS system; nor can it be used as a TENS system; nor can any TENS system be used as an UPNBSB.
The UPNBSB device also includes 3 Soft-Pinch Electrodes for both maximum electrode comfort and conductivity to the skin. Also includes its power supply and User Manual. Also includes a Pulse Modulation Selection switch (which also has an OFF position to shut-off the output signal if you wish). Also includes a NEW MULTIMETER, so that, in conjunction with our Soft-Pinch Electrodes, you can check voltages, currents and resistances between various parts of your body to detect levels of ongoing perp signal exposures, and any anomalies which may be caused by perp attacks or by serious medical conditions (which may be unknown to you - which you may want to bring to the attention of your medical provider). Last made $1995 [2 lb].
WIRING HITCHHIKING HARASSER ELIMINATORS:
Are your home/business wiring, piping, etc. or even car wiring hijacked to electronically
harass or surveil you by hitchhiking signals onto them? Because power and telephone
lines, and metal pipe (e.g. plumbing), metal tubing (e.g.
wire shielding) and metal linear structures (e.g. rebar,
girders, conduit, trim, rails, fencing) surround you virtually everywhere
you go in any building, electronic surveillance devices, equipment control devices,
mind control devices and electronic attack devices can be connected to them
in virtually every room and even outside the building for some distances - these
omnipresent conductors serve as the optimum means to connect up, transmit and
distribute these very harmful electronic surveillance, mind control and electronic
attack signals throughout the building (sometimes called "carrier
current" attacks - carrier currents caused by carrier current transmitters)
- optimum conductors for virtually endless varieties of bugs, taps, harassment,
control and line blaster devices. Our WHHE devices
both test and filter out harmful hitchhiking signals!
Since these conductors are so prevalent in virtually every building, added with the technologies of time multiplexing signals and frequency multiplexing signals, literally dozens - even 100s - of these types of very harmful signals can be operational on any day and night against you - usually no matter what rooms you are in. Your home or business is just several huge signal distribution networks plus transmitting and receiving antenna arrays. And all such wiring, piping, etc. can usually be just as easily abused for electronic surveillance, mind control and electronic attacks even if you turn OFF or disconnect them from their normal uses (e.g. turning Off AC power, disconnecting phones). This is nothing new - both power and phone wiring have been lawfully used for decades to carry high-band voice, control signals, and data (e.g. faxes, modems, DSL, zons, intercoms, alarm systems for phone lines, and intercoms and alarm systems for power lines) - proven technologies using common household AC wiring and phone wiring. Furthermore, because generic power and phone wiring and piping in all or part of one's home and business are often unshielded, they can be both easily accessed and connected up to AND used as a huge transmitting and/or receiving radio antennas to communicate with anything from electronic implants - to guys parked in the street - to cellphone towers down the road - to control centers 100s miles away - to ships at sea - to satellites - to electronically harass, control and/or interfere with your life! For examples: (1) Signals on them can be transmitted wireless for miles, and (2) Physical access to the wiring, piping, etc. is not even required; because the wiring, piping, etc. is unshielded, signals can often be inductively coupled into or out of power lines, phone lines, piping, etc. (e.g. inductively-coupled phone line taps are decades old technology). Offending microwave signals can also be reflected off of ungrounded or not fully grounded metal bodies.
Since these virtually endless varieties of bugs, taps, harassment, control and line blaster devices can take on virtually any appearance and/or be hidden in just about anything inside of or near your building, they can be very difficult to detect through physical searches (short of tearing down all of your walls and ceilings where the lines and piping run, and disassembling all of your equipment). For example, these devices can be easily concealed inside TVs, radios, computers, cellphones, landline phones, electronic handheld devices, etc. - fully operating even when the TV, radio, phone, etc. itself is not turned ON. Or hidden in an outlet, inside of your wall or in your attic - even inside your car. If you share walls, floors or ceilings with other apartments, the devices can be on their side, or even outside your building. Since not all of these harmful devices are RF devices, the non-RF ones cannot be detected using TSCM field strength testing used for wireless systems. Nor can strictly receiving devices be TSCM-detected. And usually nor can transmitting devices which transmit in bursts, randomly or pre-dawn hours, nor when the perpetrator believes the area is being electronically swept and turns Off transmitters until the TSCM crew leaves. In short, your phone and power wiring, piping, etc. can be easily and secretly tapped into using hardwired, inductive-coupling and/or reflection techniques just about any place they are routed internal or external to your home/business. To understand just how frustrating it is even for experts to really troubleshoot an area, rent the Gene Hackman movie, "The Conversation" - and that was early 1970s' relatively crude, clunky and huge electronic surveillance systems!
The high-band signal frequencies used on power and phone lines, piping, etc. (which can be time multiplexed and/or frequency multiplexed to support several such systems) are usually 5+ times higher than the standard 60 Hz / 50 Hz (power wiring) or 3200 Hz maximum (phone wiring) bandwidth normally used on them. The usable bandwidth of many power and phone lines exceed 2 MHz for loops up to about 6,000 ft (1.14 miles) and much higher over much shorter loops - very usable for electronic surveillance, mind control and electronic attack. Metal piping, tubing, fencing, rails and other structures can conduct signals far higher in frequency than even power and phone lines (because most power and phone lines, pipes, etc. are unshielded, electrically noisy and inductive and leaky to high freqs, most high-band signals are under 200 KHz). Loading these unshielded conductors with all kinds of multiplexed and high-band signals they were not designed for may cause the wiring, piping, etc. itself and their terminations to resonate with strange sounds and noises which seem to emanate from walls and ceilings often on quasi-random and directional bases (e.g. strange sounds you can hear when standing in one position but not in another nearby position, and/or at some times and not at other times, and/or during certain conditions of humidity and/or temperature but not at other conditions), often throughout most of a building, and often similar to the vibrating and humming of an old or defective power transformer. They can also vibrate and hum in the ultrasonic and infrasonic bandwidths when signals mix and produce sum and difference frequency components. The weird sounds can also sound like a distant motor running, distant voices, whispering and mumbling, spiritual and God-like voices, high-pitched voices, low-pitched voices, chattering, music, animal sounds, whistles, echoes, pulsing, pounding, popping, finger-snapping, digital data sounds, zinging sounds, whooshing sounds, theremin sounds, etc., especially when real time complex signal mixings of possibly several signals at once result in partially demodulated and/or multiply-mixed high-band signals. These weird noises can literally drive some people nuts! If you are hearing sounds, noises or even voices or digital data signals or control signals coming from your walls, ceilings or appliances or inappropriately while you are on the phone, you may not be imagining it. Also, high frequencies imposed on power wiring can adversely affect induction motors (especially compressor motors common to refrigerators, freezers and air conditioners), causing them to operate roughly, chatter noisily and possibly stall out (because induction motor speed is proportional to the frequency of its power source, multiple frequencies can harm them), and can cause lights to vary in intensity or flicker. Modulated high frequencies on phone lines can cause malfunction of phone and computer equipment (e.g. loss of broadband sync, inability or slowdown in using DSL or even dial-up, faxes, zons, etc. because of a "noisy line").
We offer 4 types of WHHE systems to test for and protect against offending EMF signals: (1) The WHHE1 is for AC power lines, (2) The WHHE2 is for phone lines, (3) The WHHE3 is for motor vehicle wiring, and (4) The WHHE4 is for non-electrical metal structures, such as pipes, tubes, appliances, fencing, rails and other metal structures, and unpowered wiring. For minimal recommended protection, you must typically have at least one of each WHHE type. For optimal and continuous protection, you must have two WHHE1 (one for each 120VAC power leg), one WHHE2 for each landline phone line, one WHHE3 for each vehicle, and one WHHE4 for each non-electrical ungrounded or improperly grounded metal structure within about 25 yards of you.
The WHHE1 is designed to plug directly into any 120 VAC wall outlet (3-wire or 2-wire, 60 Hz or 50 Hz) located virtually anywhere to both detect and eliminate these higher frequencies on your AC power wiring (and to also cause an improvement in your power factor if it is typically inductive or lagging power factor (PF)) (Note: If you have an intercom, digital or other communications system which uses home/business electric power wiring to transmit/receive signals, the WHHE1 will also filter out those signals if used at same time). For example, voice, data signals, and/or control signals at 10 KHz, 50 KHz, 90 KHz, ..., 1890 KHz, 1930 KHz and 1970 KHz could all be frequency multiplexed onto a single 60 Hz power line simultaneously. That is, as long as a WHHE1 is not connected, because the WHHE1 wipes out all frequencies much above 60 Hz - wiping out those electronic attack and electronic surveillance high-band signals in one fell swoop! You may specify the WHHE1 to be non-battery powered (used only on powered AC lines to also power it), or battery-powered (used on both powered and unpowered AC lines). Note that the WHHE1's filtering functions cannot be duplicated using commercial power strips with built-in transient suppression. Power strips with transient suppression only filter out transients which are both high-voltage AND high-frequency, and then only for those devices connected to the power strip - not the VAC power lines connected to your AC outlets and located behind your walls in your home or business. Only the WHHE1 can filter out unwanted signals at your outlets and home/business wiring (as well as devices plugged into power strips). Even for devices plugged into transient-protected power strips, the designed protection is for transients which are both high-voltage AND high-frequency - much less effective against hitchhiking voice, control and data signals (which usually result in small RMS voltage level increases way below voltage levels required to switch in transient suppression).
TEST: There is a test that will likely result in positive indication of hitchhiked signals on your AC power lines, but test requires about 2 months to complete: Obtain 3 same make and model plug-in digital clocks (not battery-powered clocks), and place them in widely-separated rooms but on the same 120VAC leg. Synchronize each clock to your cellphone or other battery-operated super accurate time source. At the end of one month, check the times on each of your 3 clocks against the device you synchronized them with. Most of these types of clocks are timed by the frequency of your AC line voltage (60 Hz in the US, 50 Hz many other places). However, with most of them, the timing is also advanced by signals and electrical noise interference on your line to various degrees based on their specific electronic designs and interference properties. If there is much communications or control signals on the line, the clocks will run faster than normal. Therefore, if at the end of the month, any of your clocks are more than a couple of minutes fast, more than likely, you have a serious problem with hitchhiked signals on your line for which we strongly recommend the WHHE1 to countermeasure. Since the electrical noise on most AC lines typically rarely reaches levels that would advance most clock timing, normally, noise by itself would contribute to about a minute or two at most in one month's time to advancing timing. If any of your clocks run too slowly, the clock is probably defective. And which clock has advanced the greatest is usually the clock closest to the hitchhiking signal input point where it gets the strongest signal. Then run this test again, with all of the clocks on the other AC leg. Note: This test is not proof of either the existence or absence of hitchhiking signals during the test month because of clock defects and nominal electronic differences; clock timing may use crystals and not line frequency; low intensity, very high frequency, and/or low duty cycle (e.g. burst signals, infrequent or occasional attacks) hitchhiking signals that don't significantly increment clock timing; very noisy line, etc., but it often is a very good indication.
The WHHE2 is designed to plug directly into any normal landline phone line (works with corded phones and cordless phones), and works whether the phone is On Hook or Off Hook to eliminate higher frequencies on your phone wiring (Note: If you use DSL, modem or other digital phone line communications system, those signals will also be filtered out if used at same time). We offer 3 versions of the WHHE2: (1) WHHE2-HB: The High-Band (HB) version (the default version if you don't specify) filters out phone line freqs starting at about 4000 Hz and above. While the HB will filter out all signals at all times when toggled ON much above the normal phone voice BW of 300-3200 Hz, it will not filter out normal speech signals in the voice BW, resulting in possible but very unlikely unauthorized voice-band transmissions when phone is on-hook. (2) WHHE2-LB: The Low-Band (LB) version filters out phone line freqs starting at about 50 Hz and above. While the LB filters out voice and data signals at all times when toggled ON, it must be turned OFF when you need to talk on the phone or use it to transmit data or it will also filter out your and the other party's voices. Note that the LB version may negatively impact ring with some phones. (3) WHEE2-CMP: The Composite (CMP) version allows you to toggle between the HB and LB versions for maximum security - when you are talking on the phone, you set it at HB, when you are sending data online, you turn OFF both HB and LB, and when phone is on-hook, you set it at LB. The WHHE2 uses the common standard RJ-11 phone connector. The WHH2 always comes battery-powered.
The WHHE3 is designed for 12VDC battery systems (e.g. vehicle battery wiring) because car battery wiring can also be - some say often - used to conduct unwanted and harmful signals which can be used for electronic surveillance, mind control and electronic attack. You can specify whether you want its cable to have cigarette lighter, battery clamp or other type of terminating connector you specify (Note: Any and all vehicle underhood connection work must be done by your automechanic at your expense and always in a legal and safe manner, and we assume no liability for the installation, removal and use of a WHHE3 device on any vehicle). You may specify the WHHE3 to be non-battery powered (used only on powered 12VDC lines to also power it), or battery-powered (used on both powered and unpowered 12VDC lines).
The WHHE4 is designed to test and protect unpowered wiring, metal piping, metal tubing, metal fencing, metal railing, metal structures, and other unpowered conductors up to about 25 feet long by testing for and filtering out signal types they carry above 60 Hz. These include offending signals hardwired or induced onto metal structures, and to some extent, reflected signals. Protecting against reflected signals is designed to protect you from perps transmitting RF signals at unprotected reflective surfaces near you for its scattering effects or angular advantages, which then reflect onto you to do their dirty work; the WHHE4 grounds out air-transmitted offending RF signals it protects in your area. The WHHE4 can test and filter out great varieties of conductors which do or do not have known or accessible signal return paths (WHHE1, WHHE2 and WHHE3 test and protect circuits which have electrical return paths paired with them, e.g. AC power line neutral, phone Ring wire, car battery ground). The WHHE4 comes with two cables, each about 12.5 feet long, and each terminated by alligator clips (or some other type of connector you specify). One cable is connected to the unpowered metal wiring, piping, tubing, fencing, structure, etc. If this metal is accompanied by an accessible metal electrical return path (e.g. wire, piping, tubing, fencing, structure, etc.), the other cable is connected to it, else it is connected to nearby grounded metal, in which case an earth ground rod may be required (earth ground rod not provided, available in hardware stores). The WHH4 always comes battery-powered. Note: Not all plumbing or tubing (or fencing or structures) is continuous metal all the way into a good earth ground. Sometimes plastic plumbing or standoffs are used, which breaks any ground connection. Even if the plumbing pipe is continuous metal all the way to where buried in earth, pipe joints can be corroded enough or use enough teflon tape to break the electrical connection, the pipe can be laid in dry ground or concrete, and/or the pipe itself can be corroded enough to break its ground connection. In fact, plumbing pipe is never a reliable earth ground. National Electrical Code: 'True earth ground physically consists of a conductive rod or pipe driven into the earth to a minimum depth of 8 feet.' Plumbing pipe is never "driven into the earth" and plumbing, tubing, fencing and structures are seldom buried at least 8 feet deep. If unpowered metal is not itself solidly grounded to earth (easily determined) - not just wet-season or intermittently grounded - it makes a great conductor for offending electronic signals.
Each WHHE device comes with a signal indicator LED and the DETECT/PROTECT toggle switch. One toggled position is the DETECT Mode in which the LED will flicker and/or brighten if there is a high-band signal on the line, piping, etc. The other toggled position is the PROTECT Mode which will filter out all types of high-band signals, transients and line noise interference hitchhiking signals to remove them from your line, piping, etc. The DETECT Mode continuously tests your conductor to determine if there is any unusual signal or other electrical activity on it. The toggle switch is especially protected with a snubber circuit designed to prevent contact arcing during switches. If the WHHE device conflicts with some other known and OK equipment or function connected to your wiring in the PROTECT Mode, then don't operate that WHHE in its PROTECT Mode when normally using such equipment or function (no known interferences in the DETECT Mode).
EXTRA PROTECTION: WHHE devices are designed to further protect your lines from possibly destructive high-voltage pulses, transients and line noise which can sometimes also occur, whether natural or manmade (e.g. helps protect you from a perpetrator trying to wreck your phone or power system - even your computer - using a phone or power line blaster to deliver high-voltage transients, pulses and electrical noise to your system and equipment; and helps protect lines and equipment against damage caused by nearby lightning strike or transients, pulses and line noise). (Note that while electronic filters may eliminate 99.9+% of a signal - so much of the signal that the tiny remaining signal is lost in the line noise - no electronic filter wipes out absolutely 100% of a signal; always experiment with WHHE device first to make sure that it does not interfere with the normal use of your lines and equipment.). This very substantial added transient protection feature includes a gas discharge lightning arrestor (surge arrestor - not normally found even in expensive transient-suppressed power strips), a MOV (varistor), and the filter capacitor itself - all of which adds substantial protection from lightning strikes, line blasters, and powerful pulsed mind control and electronic attack devices hitchhiked onto your lines, piping, etc.
Plus, if specified, WHHE devices come with an output connector which permits you to directly view hitchhiking signals on an oscilloscope or hear them on a speaker or earphones (if signal is in the audio band; oscilloscope, speaker and earphones are not included). By being able to observe and/or hear the signals which should not be on your line, piping, etc., you can often tell exactly what is being communicated or controlled, and correlate the hitchhiking signals with conversations, other activities, and unexplained manifestations.
Note that since most home and office electric power systems are 220-240 VAC and standard outlet wiring is 110-120 VAC, there are two isolated AC power "legs" that power the various 110-120 VAC outlets and functions throughout the building. Therefore, to simultaneously and continuously DETECT and PROTECT both AC power legs, you need two WHHE1 devices. Also note that if your landline phone system has more than one phone line, each phone line is isolated from each other, so therefore to simultaneously and continuously DETECT and PROTECT all phone lines, you need a WHHE2 for each and every phone line. All WHHE device-types are small, portable, easy to use, uses standard connectors, and the WHHE2 and WHHE4 are 9VDC battery-powered (WHHE1 and WHHE3 operate off of their power line voltages but we can also make them to operate off of 9VDC battery to also test unpowered 120VAC power lines (WHHE1) and car battery wiring (WHHE3)). CAUTION: Do not use any WHHE device in the PROTECT Mode to do a denial-of-service attack against anyone legitimately using a phone system or power line for some normal high-band activity, for example, by interfering with or defeating DSL, modems, faxes, zons, intercoms, alarm systems, etc.
Non battery-powered WHHE1, WHHE3. Last made $395 [1 lb] each.
Battery-powered WHHE1, WHHE2-HB, WHHE2-LB, WHHE3. Last made $445 [1 lb] each.
Battery-powered WHHE2-CMP, WHHE4. Last made $495 [2 lb].
The ULTIMO MODULATED
LED CONTROLLER: The UMLEDC produces a very wide range of programmable
LED modulations, some of which may counteract mind control (not just LED mind
control), seasonal effective disorders, some sleep disorders and circadian rhythm
disorders (circadian disorders are believed by some to be
one cause of breast cancer in women), some mood disorders, biofeedback,
relaxation therapy - an excellent LED light therapy device. But unlike other
cheapo LED devices, the UMLEDC comes with critical programmable features:
(1) UMLEDC modulations are programmable (30 Hz - 200 KHz).
(2) UMLEDC output waveforms, duty cycles and intensities are also programmable. Output waveforms can be sinewave or pulsed, or based on audio, infrasound or ultrasound you connect into it. Pulse duty cycles can be varied 10% - 90%.
(3) UMLEDC comes with input connectors used by recorders, mikes and other electronic devices to modulate the LED light with audio, infrasounds and ultrasounds if you wish (input devices to the UMLEDC are not included).
With the UMLEDC, a huge amount of modulated-LED experimentation is possible (never use the UMLEDC as a mind control device, and the UMLEDC is not sold as a mind control device, nor as a medical device nor medically assistive device). The UMLEDC can also be used as part of Visible Light Communications Systems (VLC). The UMLEDC last made was $1195 [3 lb]. Since your eyes won't likely detect the LED modulated outputs, you need a specialized device like the ULEDMCD (described above) to detect the outputs of its LED and output intensity. The UMLEDC plus the ULEDMCD last made was $1645 [5 lbs].
The ULTIMO TDCS BRAIN STIMULATOR: Transcranial Direct Current Stimulation (TDCS) - "DC brain polarization" - is a painless, non-invasive, low-risk, silent, efficient and relatively inexpensive method of applying small direct currents to the brain cortex through the skull using skin-contact electrodes. The positive electrode boosts, increases or amplifies function of brain region closest to it, while the negative electrode inhibits or suppresses brain function. TDCS has been found to boost cognitive performance and learning and increase IQ, memory and reaction times, as well as to treat several mental disorders. Along with its many important positive uses, TDCS can be used to do mind control, as well as to reverse the effects of mind control, as well as to make the subject more or less susceptible to other forms of mind control. TDCS mind control can be used in conjunction with Transcranial Magnetic Stimulation (TMS) mind control. A mere 30 minutes of secret TDCS stimulation while a person is asleep or unconscious (e.g. knocked out, drugged or undergoing surgery) can result in permanent mind control and behavioral control changes - without the use of electronic implants and with no evidence that TDCS entrainment was ever done. TDCS can be used to produce robotic victims and even Manchurian Candidates. And TDCS is now widely used by the United States Air Force to train pilots in half the usual time. See The Ultimo TDCS Brain Stimulator (Radionics.htm webpage) for details on this popular TDCS device.
The ULTIMO BRAINWAVE ANALYSIS & BIOFEEDBACK / BIOCONTROL DEVICE: The UBA&BBD permits both the extensive analysis of brainwaves and the extensive use of brainwave biofeedback and brainwave control functions. Its brainwave input stage detects and amplifies brain signals. Brainwave amplification gain is tunable (up to about 1,000,000) so that even very faint brainwaves can be accessed. Once amplified, a bank of bandpass filters are then used to break out the Delta (0.5 Hz - 4 Hz - Stage 3 Sleep, Stage 4 Sleep or deep sleep), Theta (4 Hz - 8 Hz - Stage 1 Sleep and REM Sleep), Alpha (8 Hz - 12 Hz - awake, mild/moderate stimulation, relaxed but alert), Spindles (12 Hz - 15 Hz - Stage 2 Sleep, often with K-Complex), Beta (15 Hz - 30 Hz - awake, alert, excited stimulation) rhythms, which actual signal outputs are provided for you to monitor in any combination using a meter, oscilloscope or chart recorder. Each of these outputs is internally connected to a signal accumulator stage, which accumulates each rhythm over periods of seconds and minutes to provide ultimate brain stage and stage transitional data. And because normally you want biofeedback and biocontrol functions controlled by accumulated signal energies so as not to be triggered by spurious or transient values (which may not be indicative of the brain stage) but by the actual stage that the brain is in (e.g. conscious, meditative, REM sleep, deep sleep, etc). An output is also provided for each accumulated signal. In addition, inputs, sensitivity control pots and outputs are provided for control functions, which include normally-open (NO) and normally-closed (NC) relay functions, +9 VDC battery, and 120 VAC (only with devices powered by 120 VAC) control outputs. For the ultimate in brainwave, entrainment, mind control, and behavioral modification research versatility, four jumpers are provided that permit you to jumper between actual signal and/or accumulated signal outputs to NO relay, NC relay, battery and/or VAC biocontrol circuit inputs, with the sensitivity of each biocontrol function controlled by its sensitivity pot. Finally, with the UBA&BBD, you can observe and record individual brainwave signals in any combination of alpha, beta, delta, theta and/or spindles, and you can use any of their actual and/or accumulated signal outputs to control NO relay, NC relay, battery and/or VAC outputs. Last made $1695 [2 lb] (battery-powered only), $1895 (120 VAC-powered only), and $1995 (both battery and 120 VAC powered). Does not include any meter, oscilloscope or chart recorder.
The NEUROPHONE DEVICE: Incredible, unique and visionary device that converts speech and other complex and highly redundant audio frequency signals into a much more concentrated and compact form that can be transmitted over a much narrower bandwidth, and over greater distances through various materials. The ND is of particular interest to:
The ND comes single-channel. Versatile, fascinating and useful. Modern IC Version, last made $995 [4 lb]. Transistorized (traditional, but using modern transistors) Version, last made $895 [5 lb]. Plans for transistorized version - still available - $195.
The OMNIMAX TENS SYSTEM:
TENS (Transcutaneous Electrical Nerve Stimulator) devices ideally function to
relieve chronic pain and nerve-related disorders (e.g. twitching muscles), to
accelerate the healing processes, to relax nerves, to promote rest and sleep,
as in invigorator, to minimize snoring, for Radionics research, as a general
lab stimulator (e.g. for stimulus and response research and
pain research) - much more! Lesser TENS devices meet only few of
these functions (and even then only on a limited basis).
Don't confuse the OTS with the other $600 - $900 TENS devices (e.g.
Myostim systems), that uses only 1 transistor (no IC) per channel!
You can program and fine-tune the OTS to produce practically limitless variations
of electronic signal outputs to suit YOUR particular needs - the OTS puts virtually
all other TENS devices to shame! Features programmable high-voltage output (25
- 150 Vpp); programmable frequency (20 Hz - 200 KHz); selectable sine, square
wave, pulse (5 - 95% of period) and triangular waveform outputs; programmable
duty cycle (5 - 100%); programmable triangular wave, positive sawtooth wave,
and negative sawtooth wave automatic frequency sweep control or manual frequency
control (you select); and selectable for periodic waveform, burst, white noise
or pink noise output - great for jamming nerve impulses. The OTS is so extremely
versatile and powerful that we ourselves have used these devices for personal
transcranial stimulation (e.g. transcranial direct current
stimulation, transcranial alternating current stimulation, transcranial radio
frequency stimulation, and transcranial magnetic stimulation), personal
transcutaneous stimulation (e.g. personal pain blocking, personal
hair growth stimulation), plant growth, metal deposition / metal
plating, ultrasonic / sonar, high voltage, and pest repellant research, and
to test electronic component specifications (one person suggested
that we make them as penis stimulators - regardless of his "findings,"
we do NOT sell any device as penile stimulators or for any other medical use).
Great as a general electronics laboratory function generator to meet virtually
every signal waveform and type an electronics circuit design or application
calls for. You can then experiment with these numerous possible combinations
of output voltage levels, frequencies, waveforms, durations and duty cycles
to produce results that are optimum for YOU. If there does exist an electronic
combination that will optimally satisfy YOUR needs for a few pennies of electrical
energy, will that not be a great improvement on your quality of life over whatever
current methods you are using to try to obtain similar results, if indeed you
are using another method to try to obtain similar results? 1-Channel: Last made
$1695 [2 lb]. 2-Channel (2 independent channels, same case
& power supply): Last made $2995 [3 lb].
The ULTRA OMNIMAX SYSTEM is a full blown OMNIMAX SYSTEM-type device as stated above, but which also includes an audio bandwidth input with several forms of pulse modulation of it to produce modulated pulse outputs for mind control research, PLUS outputs for small high-inductance magnetic coil electrodes (including the small magnetic coil electrodes) which can be used for Transcranial Magnetic Stimulation research (TMS), with the User Manual containing detailed information on both the mind control research and TMS research-type features of this truly mind-boggling device-type. 1-Channel: Last made $2395 [3 lb]. 2-Channel (2 independent channels, same case & power supply): Last made $4495 [5 lb].
The ULTIMO NOISE COMMUNICATOR SYSTEM: Used to be that control signals, voice and data could only be communicated using clear signals. Not any more! The UNCS is a system, consisting of both an ultrasonic transmitter and ultrasonic receiver, used to demonstrate that noise can be used to communicate intelligent signals. Electronic, electrical, audio, ultrasonic and infrasonic noise can be intentionally used to produce a control signal, voice signal or data signal itself. Our research shows that noise - virtually regardless of what mode it is transmitted in and what band it occupies within that mode (but almost always high band) - can itself be used to transmit information! Noise communications is in fact a state-of-the-art method of secret communications. Noise is a particularly effective means of further stealthing mind control and electronic attacks as well as communications because even if a victim is able to correlate noise bursts with his/her manifestations, authorities can easily write off his/her allegations, such as, 'It's just a bunch of radio static that just happened to correlate with X's manifestations - everyone knows that noise can't control anything or transmit data.' Sometimes the intelligent information in the noise will give it a quality where it will sound voice-like (quasi-voice) or data-like - you may even be able to discern what the voice is actually saying if you listen very carefully - and it can also be subliminal (e.g. using ultrasound noise to conceal audio signals). In other cases, it will just sound like noise bursts, and often totally overlooked as a possible source of voice, data or control signal, or go undetected by normal senses because both the noise and signal are ultrasonic. Last made $9985 [4 lb].
SCANNERS - The DEVICE! (NA): Ever want to forcibly, yet secretly, project YOUR THOUGHTS into other people and/or animals as an overpowering EM signal? After years of secret experimentation, John Williams developed Scanners - The Device! The ultra-high gain, ultra-low noise and distortion brainwave (and other biologic signal) amplifier coupled to a powerful and effective, yet highly directional, EM transmitter is an absolute must for all serious students and practitioners of Psychic or Mind Control Lab, Weaponry and Countermeasure applications. Range is about 50 feet. Can be attached to a helmet or hat or on/inside clothes, carried in the hand, or concealed inside or behind any nonmetallic object less than about 6" thick. The SD is so controversial, we simply can no longer make it for the general public! Last made $1299 [2 lb]. HISTORICAL DIAGRAMs only: $1,000.00.
The ULTIMATE WEAPONS & LAB DEVELOPMENT SYSTEM (NA): The UW&LDS is a very powerful, effective, highly directional and totally quiet system used in theoretical and applied research into EM weaponry and psychological and physiological manifestations (e.g. behavioral modification and mind control). The UW&LDS uses programmable modulated GHz waveforms. Hand-held and portable. Range exceeds 1 KM. User manual includes operation details, insights and tips. The UW&LDS is a complete EM weapons/lab device experimental development system. Last made $3455 [12 lb]. CAUTION: The UW&LDS is one bad device! It can produce boresight waveforms that are extremely dangerous - and again, buyer assumes all liability for its use and abuse! As with all of our devices, do NOT use in any illegal, unethical or immoral way whatsoever!
The ULTRASONIC GALVANIC SKIN RESPONSE CORRELATOR:
We believe that the Galvanic Skin Response (GSR) is a good indication
of anomalies that reside beneath the skin where the galvanic skin response is
taken from, and that galvanic skin responses will be very close to each other
when the taken on two corresponding positions on symmetrical parts of the body
of a healthy person. In other words, for example, if there is an anomaly located
unseen under the skin of the right foot but not under the left foot skin in
the same foot area, galvanic measurements will likely be different for both
foot areas (same part of foot; amount of galvanic skin response
difference largely depends on type, size, position and depth of anomaly; both
areas should have same amount of skin wetness) because the two feet are
fairly symmetrical to each other; however, if there is no anomaly in either
foot, then the galvanic measurements, while usually not identical, should be
close to each other. We define an "anomaly" (e.g.
tumors, infections, impaired blood flows, nerve disorders, strained/torn muscles,
strained/torn ligaments, strained/torn tendons, cracked/broken bones, lesions,
subcutaneous electronic implants, etc.).
The UGSRC includes two of our proprietary Super Soft-Pinch Electrodes. When attached to the skin, the input is fed into an ultra high input impedance ultra high gain amplifier (with AGC and adjustable gain to about 1,000,000), with the results displayed on meter (included). AGC - Automatic Gain Control - is important because it much extends the dynamic range of the amplifier, allowing for full amplification of very weak signals but little amplification of very strong signals.
What makes the UGSRC especially important and totally unique is that it includes an ultrasonic pulser - a special ultrasonic output transducer. The purpose of the ultrasonic transducer is to "thump" or "ping" tissues and organs (i.e. stimulate tissues and organs) located under the skin with ultrasonic pulses (adjustable pulse rate), which pulses are believed to cause an electrical reaction by some anomalies. This reaction may result in a much heightened or amplified galvanic skin response, if so, causing a much greater difference in the galvanic skin response between the side with the anomaly and the side without the anomaly. And furthermore, this reaction may also result in a much much heightened or amplified galvanic skin response from the same electrode placement over an anomaly between the ultrasonic transducer being ON and being OFF, thereby making the UGSRC very useful in electrically ferreting out and pinpointing those well-hidden anomalies, and also for unilaterally testing non-symmetrical parts of the body as well. The ultrasonic transducer is usually placed between the two galvanic electrodes.
Galvanic skin responses (GSRs) are also traditionally used to detect and expose lying (e.g. polygraphs / lie detectors), psychology research (e.g. reactions to stress and to disturbing thoughts and memories), biomedical research, biofeedback research, paranormal research / psychic research, mind control and electronic attack, and for "ghostbusting." GSRs are ever popularly used by a large religion to ferret out and compensate for stresses in people's lives. We also believe that the UGSRC can be used to test and/or stimulate animals and plants as well. The UGSRC is great for those into researching their own bodies, gadgeteers, experimenters, science researchers / science projects and Science Fairs. Practically endless uses. UGSRC last made $1995 [2 lb].
(NOTE: We are not licensed medical professionals, so neither can we make any medical claims nor can we provide medical opinion or medical advice; should you believe that you have an anomaly under your skin, promptly contact your own doctor (at your own expense); since this is a newer technology, we do not have tables that correlate galvanic skin responses to specific anomalies so we have no diagnostic information relating to any particular galvanic skin response for anomalies that may result from any medical condition so the UGSRC is NOT intended to be a diagnostic tool - see your doctor; since the UGSRC can only detect those anomalies that cause differences or changes in the galvanic skin response, it cannot detect anomalies, if any, which do not produce galvanic skin response differences or changes; the lack of a significant difference or change in galvanic skin response does not mean that there is no anomaly; external electromagnetic fields and electronic beams (e.g. from a direct energy electronic attack) which impact one side of the body more than the other can result in different galvanic skin responses in absence of any anomaly and thus the UGSRC may also be a useful tool in detecting exposures to ambient EM fields; and differences in galvanic skin responses can result from no known, understood or provable internal or external causations).
The ULTIMO "MONTAUK CHAIR":
The infamous Montauk Chair is reputed to be based on the the design of a special
chair which was used by space aliens to perform mind control. The original Montauk
Chair was reputedly copied from a chair recovered from a UFO crash site - a
UFO believed to have been used to perform alien abductions. The Ultimo "Montauk
Chair" (UMC) comes with an headrest and an antenna array, which is adjusted
to be poised just above the head and is shaped similar to a half-unfolded umbrella
or Asian conical hat (i.e. "coolie hat"). The
mind control / body control electronics are stowed in a shelf underneath The
Ultimo "Montauk Chair". We cannot include any mind control / body
control electronics (as policy, we can only provide mind control
and electronic attack detection devices and countermeasures) with The
Ultimo "Montauk Chair," but it does include its mind control electronic
function diagrams (no mind control circuit diagrams),
and its transducers (e.g. embedded coils, antennas, sounders,
etc.), including their technical specs and all of their cabling and
connectors, so that one can design and implement his/her own system. The Ultimo
"Montauk Chair" is not limited to mind control and body control but
can also be used for relaxation therapy, pleasure therapy, meditation, learning
therapy, dream creativity, dream research, sleep research, radionics research,
biofeedback research, entertainment, seances, etc., any or all of which we can
include as part of your unique CD project at extra costs. In fact, our Ultimo
"Montauk Chair" is ideal for our Transcranial Direct Current Stimulation
(TDCS) device-types (ULTIMO TDCS BRAIN STIMULATOR (UTDCSBS)) and
the Transcranial Magnetic Stimulation (TMS) device-types we also do as CD projects
(see our radionics.htm webpage for the UTDCSBS description).
As part of the Client's CDAF application, the Client specifies the chair which we buy and convert into our Ultimo "Montauk Chair", because people vary in size and shape, as well as preferences for style, material and color. There are a few restrictions: (1) The chair must either have a sturdy headrest or the back of the chair must be strong enough for us to install a sturdy headrest. (2) The chair must have some area, preferably underneath, where a shelf of at least 1/2 cubic feet can be built to stow electronics (no dimension less than 4"). (3) The chair must be padded (some padding will be opened up by us and then resealed for placement of transducers, including coils, antennas and sounders). (4) The chair must have a minimum of metal in it near or above seat level as metal may interfere with its operation. (5) The chair must not weigh more than 60 lb. The Client selects a chair of his/her preference, and then emails us the make, model, dimensions, and type and color of chair materials. If we cannot find that chair make and model in our area, we will then try to find a chair most close to the Client's specified dimensions, type and color. Last made $6985 [Weight and thus Shipping costs vary depending on Client's size and chair preferences, and shipping address] (for a new chair with a built-in headrest not exceeding $200 in chair's base price).
The 6TH SENSE COMMUNICATOR: One popular product. The SSC consists of a bio-transceiver, which has electrodes (attached with an elastic band or tape). The electrodes may be attached to the heads of the source and receiver, to the head of one and the body of the other, or to each of their bodies, depending upon use. Examples: For bio-commo, the electrodes are attached to the head. For healing, one device's electrodes are attached to the head (or body) of the healer (source), while the other is attached to the relevant part of the body of the subject (receiver). What the SSC does is to highly amplify signals produced by the head/body of the source and transmit them to the head/body of the receiver. Thus, the receiver can actually experience the electrical activity generated by the source's brain. More than one SSC can be used at the same time to involve more than one source and/or receiver. And the source and receiver can be the same person or animal. Sure to give you endless hours of experimentation, exploration, learning, fascination, pleasure and amusement. Last made $395 [2 lb]. For two units (required for full-duplex operation), last made $695 [3 lb]. Last made $275 [1 lb] for each additional unit.
The TELEPATHIC AMPLIFIER : Some people are reputed to possess awesome telepathic powers (we do not claim that telepathic powers exist, or if they do exist, in what form, to what extent, who has them, or how used). "Telepathy" is a highly-specialized form of nonverbal and non-sensory communication believed used in some forms of subliminal mind control, mind-reading, remote viewing, secret communications, brainwashing, brainwave entrainment, behavioral modification, electronic attacks, and alien attacks. After much research, we now believe that we have pinned down the exact mechanism behind mental telepathy powers. For those who do not now possess adequate telepathic powers to effectively and reliably use them, and for those who have established telepathic powers and wish to increase range, the TA is a must! Note that our telepathic powers theory is strictly proprietary and a trade secret, and the result of many costly hours devoted to this research; however, we are also willing to seriously consider any Telepathic Amplifier device-types based on customer theory(ies). Last made $695 [3 lb], based on our theory.
The ALIEN BUSTER BLASTER : Sometimes referred to by others as a space alien jammer,
space alien buster jammer or space alien blaster. Some know or believe that
space aliens (ETs or extraterrestrials) exist,
possess advanced mental telepathic powers, and secretly communicate, eavesdrop,
control, harass and attack mental telepathically. How can one escape capture
if the abductor knows and controls one's every move and thought? Often, UFO
abductees believe that they can't escape alien abduction since their space alien
captors know or can predict their every move by telepathically reading their
minds and controlling their actions, and telepathically communicating this info
to their "gang" members for electronic gang stalking. At least until
now! Based on our proprietary telepathic research, the ABB jams and disrupts
space alien telepathic communications as how we believe they occur (if
they do occur). If so, creating a Telepathic-Free Environment for
its believed victims protects them from telepathic mind reading, telepathic
mind control, telepathic harassment, telepathic attacks, telepathic interference,
and telepathic surveillance / telepathic tracking / telepathic location-finding
by space aliens should the source of the attacks be telepathic and of space
alien origin. Note that our space alien telepathic theory is strictly proprietary
and a trade secret, and the result of many hours of space alien and mental telepathy
research (and not provable because to prove space alien telepathic
attacks using double-blind scientific studies requires recruiting provable space
aliens to attack uninformed victims in scientific laboratory settings witnessed
by Government scientists - all of which are not reasonably possible or likely
legal to even attempt - the very reason why most victims of claimed space alien
attacks cannot prove their attacks to others and must act on their own to protect
themselves, and why we never make any claims about the existence of space aliens,
space alien actions or intentions, or mental telepathy or any other paranormal
phenomenon). We are also willing to seriously consider any Alien Buster
Blaster device-types based on Client theory(ies) of space alien mental telepathy,
if it can be reasonably implemented using electronics. Last made $595 [2 lb],
based on our theory.
NOTE: While we ourselves believe that space aliens exist, are walking the Earth right now, and are stalking and electronically attacking (or possessing or controlling) people, we do NOT claim that space aliens exist (or ghosts or spirits), or space aliens are walking the Earth, and if so, are stalking and electronically attacking people, because it is difficult to prove that someone is being electronically mind controlled or attacked and much more difficult to prove whether or not the attackers are humans or space aliens as their mind control signals could be very similar.
The ULTIMO POWERED/NON-POWERED MOBIUS COILS:
The UP/NPMC is an induction coil specially and uniquely wound in a Mobius Coil
pattern - often used as a transmitter antenna and/or receiver antenna. The Mobius
Coil is an extension of the legendary Faraday loop. We believe that our Mobius
Coil configuration - as opposed to an ordinary (non-mobius) induction coil -
produces unusual beneficial results relevant to jamming mind control and electronic
attack signals, and also produces therapeutic and meditative benefits (NOTE:
not sold as a medical device or medically-assistive device). Claimed
to be very protective against Scalar Wave attacks and Directed Energy attacks.
Can come with a tunable electronic waveform generator with selections for waveforms,
frequencies, duty cycles and intensities. For your UP/NPMC, you specify Mobius
Coil diameter from 1" to 24" to fit where you want the coil to fit
(eg: head (head band), neck (necklace), wrist (bracelet), arm
(arm band), foot, calf (anklet), leg, hips, waist (belt), chest, finger (ring),
toe, etc.), usually a closed loop usually made of 1"-wide copper
banding*. While Mobius Coils typically come round in shape, it is flexible and
can be shaped or re-shaped into an oval, square, rectangular, triangular or
spiral shapes (limited to its flexibility range; depends on metal
hardness and thickness) if you wish to (some have reported
different results when the Mobius Coil shape is changed). The Mobius
Coil itself is also tunable thru a wideband of frequencies. Mobius Coils are
very exciting experimental devices with practically unlimited applications,
and are relevant to many mind control and electronic attacks. And often used
in conjunction with neodymium magnets (ie: rare earth magnets), amethyst crystals,
garnets, laser diodes and pyramids. Often used in healing (eg:
Helmholtz Coil applications), DNA, quantum entanglement, time travel,
scalar wave, directed energy and orgone research. When it comes to Mobius Coil
applications and benefits, researchers have just scratched the surface! Can
be substituted for just about any other compatible antenna application.
With our tunable waveform Mobius generator (ie: Powered-1), last made $895 + $49 per inch of specified coil diameter for first winding + $19 per inch of specified coil diameter for each additional winding. Battery-powered only (add $50 for 120VAC-powered only, add $100 for both 120VAC and battery powered).**
With The Ultimo Solfeggio Harmonizer and/or The Ultimo 7 Chakras Frequency Harmonizer (ie: Powered-2), descriptions below, last made $395 + Cost(s) of the Harmonizer(s) you choose + $49 per inch of specified coil diameter for first winding + $19 per inch of specified coil diameter for each additional winding. Battery-powered only (add $50 for 120VAC-powered only, add $100 for both 120VAC and battery powered).**
Without the tunable waveform generator (ie: Non-Powered), last made $395 + $49 per inch of specified coil diameter for first winding + $19 per inch of specified coil diameter for each additional winding.
*We can also make Mobius Coils from aluminum, silver, gold, platinum, mu-metal, and some other metals. And using wire instead of a band. If wire, we can do air coils, iron-core coils, ferrite coils, torroids, etc. And also in 1/4", 1/2", 3/4", 2", and 3"-wide solid metal band. If not specified otherwise by you, 1" wide copper banding will be used, else clearly specify objects and materials in your CDAF. Single Mobius Coils and Double Mobius Coils are most popular. If made totally or partially of silver, gold, platinum, mu-metal or other costly metal, Client must provide all of the metal materials - our Cost Estimates never include costly materials for any device. Some Clients insist on gold Mobius Coils because gold possesses magic-like quantum properties (eg: gold color; never tarnishes (immortality and infallibility), etc.), and will not accept anything else. We can do Mobius Coils of 1-twist to 10-twist (if the material permits); 1-layer and 1-twist if not specified otherwise. If for a body part, use a flexible (seamstress-type) tape measure to measure around the thickest part of your body the Mobius Coil must clear, then provide us the metal object you want us to convert into a Mobius (or the materials for us to make your Mobius from scratch) that has an inside circumference dimension that is at least 20% larger for a 1-twist (because the twist will decrease the inside diameter); add 15% more for each additional twist you want. Allow for metal losses of up to 10% if cutting is required; 5% metal loss if no cutting is required. If you provide your own metal, describe in your CDAF the type of metal, its width and its thickness, and attach a JPG or GIF image if you can. We cannot do a Mobius Coil from radioactive, chemically or biologically contaminated materials, or from dirty, cut, torn, defective or corroded materials. Please do not send us any object or materials unless or until we call for it/them.
**With the waveform generator turned Off, this Powered Mobius Coil operates the same as the Non-Powered Mobius Coil, so it can be used in either way. For waveform generator Mobius Coils, using a pair of them appears to be much more effective than just one Mobius Coil because with two Mobius Coils (eg: one on each wrist, arm, ankle or leg), the electrical waveforms can be sent thru your body. And a pair used this way, can also help you determine the direction of an offending signal (by turning your body to see what orientation causes the greatest manifestations). CAUTION: Some believe that some or all ElectroMagnetic Fields are harmful to health, so check with your trusted licensed medical doctor first to use this or any other EMF device or if you have medical-like manifestations. Do not use if you have any kind of medical electrical implants (eg: pacemaker, diabetic monitor, etc.).
The VERY FLAT & THIN SPIRAL ANTENNAS: Unique and difficult to make/find thin, flat spiral antenna with many applications, including with three devices described above. We can do just about any flat, thin spiral antenna from dime-size to about 12" diameter size in any gauge of wire from 30-gauge to 10-gauge (26-gauge most common, the thicker the gauge the thicker the completed antenna), single-layer and multi-layer (mutlilayer has greater inductance but is also thicker), and copper or nichrome. Great not only for optimum antenna placement through thin slots, cracks, slits, orifices, openings and spaces in electronic equipment chassis and between PC boards for electronic diagnostic, electronic troubleshooting and electronic control purposes but also for medical, biomedical (e.g. miniature Helmholtz coils, brainwave coils), biofeedback, remote control, electronic implants, magnetic field generation coils (e.g. telecoils/magnetic induction loop systems), small metal detector coils, magnetometer coils, communications antennas, surveillance antennas (e.g. direction-finding antennas; and 'through-wall' type applications where the transmitter coil is on one side of a wall and the receiver coil is opposite on the other side), near-field TSCM monitoring, EM shields, works of art, jewelry, crafts, wall mountings, work mats, heating mats, coasters, conversational pieces, etc. We can also cover, coat, and/or mount the antenna using many different materials and fixtures. Last made $29 [1-2 lb] for a spiral antenna about the width and thickness of a credit card, about 400 microhenry.
The SUPER SOFT-PINCH ELECTRODES (Pair): The SSPE electrodes are a very special non-invasive external electrode pair (non-invasive electrodes) which gently, yet securely, pinches onto fingers, toes, ears, nose, loose skin, plant parts, rough and uneven surfaces, etc., and do not require any skin penetration, gel, saline solution, pad, tape or elastic band to work. The Soft-Pinch Electrodes are very versatile spring-operated and bifurcated on both sides (2-tine fork-like). Because these electrodes are bifurcated, other electrodes can be connected to them in series or even groups if you wish using screws. Can be used as experimental and monitoring radionic electrodes, biomedical electrodes (bio electrodes), biofeedback electrodes (BF electrodes), paranormal electrodes, electronic attack electrodes, and mind control electrodes. Can be used on people, animals, plants, and even inert objects. Not intended as medical electrodes. Can be used as stimulating electrodes or recording electrodes - even for some high-voltage uses (used by us for voltages upto 250V, but always carefully test first). Not only are these electrodes very gentle and hold on well, but they can be quickly connected, disconnected and moved around on the surface being used on. SSPE electrodes have very supple and flexible 1/8" dia. leads, yet lasts for 10+ years under normal use and are highly insulative and water and oil resistant. The SSPE comes in any length you specify, 2' - 60' foot range (combined lengths of both SSPE electrodes), and each SSPE electrode can be of the same or different lengths and/or use the same or different end connectors as you specify (because these are Soft-Pinch Electrodes, we recommend 1-2 feet extra for slack). Last made $12.95 for 2' [1 lb], + $4.95 for each additional combined-length foot you require (specify length of each lead, and your end connector(s) - BNC, banana plugs, pin plugs, spade lugs, "eye" lugs, alligator clips, etc., lugs and 3' lead lengths (6' total) are assumed if you don't specify). For an image of Soft-Pinch Electrodes and more details, see ABQ-Techzonics Test Equipment webpage, then search for this Item there (search for "SSPE"), then return here to Lone Star Consulting, Inc. to obtain all you need (Note: As policy, we never recommend for or against another company, product or service).
The VELOSTAT ELECTRODES (Pair, with Meter): "Velostat" is a plastic material impregnated with carbon for conductivity that is commonly used in antistatic bags that hold electronic parts. Velostat works great to both shield against and detect static electric fields, which can develop on the body due to skin exposures to static electricity and EMFs, so therefore, our Velostat Electrodes can give you a very good indication of your ambient electrical exposure environment, and thus allow you to find ways to best shield against or escape high static electric and EMF exposure areas. No other electrodes can duplicate Velostat Electrode functions. The VE electrodes are a very special non-invasive external electrode pair (non-invasive electrodes) which gently, yet securely, attaches to bare skin, and do not require any skin penetration, gel, saline solution, or pad to work. Depending on skin adhesion (moist skin is best), tape or elastic bands may be needed. Can be used as experimental and monitoring radionic electrodes, biomedical electrodes (bio electrodes), biofeedback electrodes (BF electrodes), paranormal electrodes, electronic attack electrodes, and mind control electrodes. Can be used on people, animals, plants, and even inert objects. Not intended as medical electrodes. Can be used as stimulating electrodes or recording electrodes - even for some high-voltage uses (used by us for voltages upto 90V, but always carefully test first). The carbon-impregnated Velostat Electrodes come with a multimeter so that you can monitor yourself thruout your day, if you wish, to help you detect high-exposure periods and high-exposure places. Not only are these electrodes very gentle and hold on well, but they can be quickly connected, disconnected and moved around on the surface being used on. The VE comes in any length you specify, 2' - 60' foot range (combined lengths of both VE electrodes), and each VE electrode can be of the same or different lengths and/or use the same or different end connectors as you specify (because these are Velostat Electrodes, we recommend 1-2 feet extra for slack). Last made $29.95 for 2' [1 lb], + $4.95 for each additional combined-length foot you require (specify length of each lead, 3' lead lengths (6' total) are assumed if you don't specify).
Introduction to this Page
Customized Devices Application Form (CDAF)
This webpage is filled with mind control information and electronic attack information relevant to mind control strategies, electronic attack strategies, mind control tactics, electronic attack tactics, mind control techniques, electronic attack techniques, mind control weapons, electronic attack weapons, mind control countermeasures, electronic attack countermeasures, and mind control detectors and electronic attack detectors.
IMAGE SPONSORED BY: |
Lone Star Consulting, Inc.
REPRINT POW-MIA IMAGE=>
ON YOUR WEBSITE
NOTE 1: We make no medical, legal, scientific, engineering, supernatural or paranormal claims including but not limited to claims about the existence, extent, intentions, purposes and capabilities of space aliens, ghosts, spirits, psychic powers, psionics, mental telepathy, precognition, auras, clairvoyance, remote viewing and pschokinesis - all related CD projects we do are based on our proprietary theories SHOULD they actually exist AND if the customer does not clearly specify in his/her CDAF another theory he/she wants the CD device design to be based upon.
NOTE 2: By policy, we never recommend for or against, approve or disapprove, sponsor, endorse,
support, guarantee, or take any responsibility for any of the content of any
non-Lone Star Consulting, Inc. webpage, website, advertisement, publication
or other statement EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. And by policy,
we never recommend for or against, approve or disapprove, sponsor, endorse,
support, guarantee, or take any responsibility for any non-Lone Star Consulting,
Inc. company, product or service EVEN IF WE HAVE PROVIDED A HOTLINK TO IT. For
more information on our policies, please refer to our policies.htm
Webmaster's Test Links only - not for visitor use: Source-A Source-D Source-E Source-F Source-G Source-H Source-I Source-J Source-K Source-L Source-M Source-N Source-P Source-Q Source-R